Chapter 6 Power Connections; Power Connections Overview; Power Connections - ZyXEL Communications IES-2500 User Manual

This chapter shows you how to connect the IES-2500 main chassis to a power source.

6.1 Power Connections Overview

Use the following procedures to connect the IES-2500 to a power source after you have installed the main and
splitter chassis in a rack.
Refer to the section on power consumption in the hardware specifications in the appendices and
Keep the IES-2500 power switch in the OFF position until you come to procedure for turning on the power.

6.2 Power Connections

The IES-2500 power connection and power switch are on the back panel of the main chassis. Use only the power
cable that came with your IES-2500.
6.2.1 Procedure to Connect and Turn on the Power
To connect the power to the unit, connect the female end of the supplied power cord to the power
Step 1.
receptacle on the back panel.
Connect the other end of the power cord to a power outlet.
Step 2.
Move the power switch to the ON position.
Step 3.
Power Connections
make sure you are using an appropriate power source.
Chapter 6
Power Connections
IES-2500 User's Guide
6-1