Hot-Air Nozzle; Side And Angle Alignment Of The Hot-Airnozzle - Pfaff 8304-020 Instruction Manual

12

Hot-air nozzle

.03
12 Side and angle alignment of the hot-air nozzle
.03.01
Requirement
1. When hot-air nozzle 5 has been swung into place, it should be positioned in the centre
of the feed roller 6 in feed direction.
2. When viewed from the rear, the front edge of the hot-air nozzle 5 should be paralell to
the axis of feed rollers 6.
Fig. 12 - 01
● Adjust bracket 1 (screws 2) according to requirement 1.
● Adjust bracket 3 (screw 4) according to requirement 2.
(only on machines with hot-air nozzle)
1
2
3
4
6
Adjustment
5
12 - 2