Adjustment
12
Adjustment
12
Notes on adjustment
.01
All adjustments in this manual are based on a fully assembled machine and may only be
carried out by expert staff trained for this purpose.
Machine covers, which have to be removed and replaced to carry out checks and
adjustments, are not mentioned in the text.
Screws, nuts indicated in brackets ( ) are fastenings for machine parts, which must be
loosened before adjustment and tightened again afterwards.
12
Tools, gauges and other equipment
.02
● 1 set of screwdrivers with blade widths from 2 to 10 mm
● 1 set of spanners/wrenches from 7 to 13 mm across flats
● 1 set of allen keys from 1.5 to 6 mm
12 - 1
Before all adjustment work switch the machine off and let it cool down!
Danger of burns if the heating element is touched!