Installation And Commissioning; Installation; Adjusting The Table Height - Pfaff 8304-020 Instruction Manual

Installation and commissioning

8 Installation and commissioning
8

Installation

.01
Suitable connections for power and compressed air, an even and firm floor surface and
sufficient lighting must be provided for at the installation site.
8

Adjusting the table height

.01.01
l Loosen screws 1 and set the table at the required height.
l Tighten screws 1 firmly again.
8 - 1
The machine must only be installed and commissioned by qualified personnel!
All relevant safety regulations must be observed!.
Fig. 8 - 01
1
1