Locking Foot Switch (Optional); Temperature Regulator / Fault Indicator - Pfaff 8304-020 Instruction Manual

Controls
7 Locking foot switch
.03
7

Temperature regulator / fault indicator

.04
7 - 2
2
Fig. 7 - 03
3
2
4
Fig. 7 - 04
(optional)
● Following functions are triggered by foot
Switch 1:
Switch 2:
1
● The temperature can be set with the
● Display 2 shows the required value and
● When the following faults occur, fault
-
-
-
When a fault has occurred:
● Eliminate the fault.
● Acknowledge elimination of fault by
1
switch 1 and 2.
Positioning the workpiece (top
feed roller is lowered)
Starting the heat-sealing pro-
cess (the heating element is
swung into position/feed rollers
are started)
The functions triggered by
pedal 1 differ according to the
operational mode of the machine
(see Chapter 7.08 Operational
modes-selection switch).
buttons 1.
display 3 the actual value.
indicator 4 lights up:
Fault on temperature regulator or sensor.
Overheating of the heating cartridge.
hot-air pressure too low.
pressing fault indicator button (lamp off).