Table of Contents
Advertisement
8
Installation and commissioning
8
Installation
.01
Suitable connections for power and compressed air, an even and firm floor surface and
sufficient lighting must be provided for at the installation site.
8
Adjusting the table height
.01.01
Fig. 8 - 01
! Loosen screws 1 and set the table at the required height.
! Tighten screws 1 firmly again.
The machine must only be installed and commissioned by qualified personnel!
All relevant safety regulations must be observed!.
Installation and commissioning
1
1
8 - 1
Advertisement
Table of Contents
