Dcp (Detachable Control Panel) - Clarion DC425 Owner's Manual

[6. DCP (Detachable Control Panel)
Source Unit Front
DCP Rear Panel
Storing the DCP in the DCP Case
Hold the OCP, in the orientation as shown in the
figure below, and put it into the supplied OCP
case. (Ensure the OCP is in the correct orienta-
tion.)
OCP
OCP case·
• The DCP can easily be damaged by shocks. After
removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
• When the release button is pressed and the DCP is
unlocked, the car's vibrations may cause it to fall.
To prevent damage to the DCP, always store it in a
protective case after detaching it.
• The rear connector that connects the source unit
and the DCP is an extremely important part. Be
careful not to damage it by pressing on it with fin-
gernails, pens, screwdrivers, etc.
Note:
• If
the OCP is dirty, wipe off with a soft, dry cloth only.
~*
The OCP is unlocked.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the included OCP case to prevent scratches.
We recommend taking the detachable control
panel with you when leaving the car.
Removing the DCP
1. Turn off the power.
2. Press the OCP Release button
0],
3. Remove the OCP.
Attaching the DCP
Insert the OCP into the right side of the source
uhit and press the left side to lock it.
Do not insert the DCP from the left side. Doing so
may damage it.
DX425
7