Table of Contents
Advertisement
6. DCP
The control panel can be detached to prevent theft When detaching the control panel, store it in the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches
We recommend taking the DCP with you when leaving the car
Removing the DCP
1 Hold down POWER button
[1]
for 1 second or
longer to switch off the power
2 Deeply push in Open button
[j]
to unlock the
FLIP DOWN PANEL
*
If the FLIP DOWN PANEL does not open fully,
gently open it with your hand
Attaching the DCP
1 Insert the right side of the DCP into the main
unit
2 Insert the left side of the DCP into the main
unit
• The DCP can easily be damaged by shocks After
removing it, be careful not to drop it or sUbject it
to strong shocks
• If the FLIP DOWN PANEL is kept open, the DCP
may drop due to vibration of the car
This results in damage to the DCP. So close the
FLIP DOWN PANEL or remove the DCP to store
into the case
• The connector connecting the unit and the DCP is
an extremely important part Be careful not to
damage it by pressing on it with fingernails,
screwdrivers, etc
Note:
• If the DCP is dirty, wipe off the dirt with
a
soft, dry
cloth only
DCP
III
3 Pull the DCP toward you and remove it
4 Close the HOLD FLAP
Be sure to close the HOLD FLAP for safety
when removing the DCP.
DX515
7
Advertisement
Table of Contents
