Enable Mobile Connect - Cisco 7821 User Manual

Calling Features

Enable Mobile Connect

Procedure
Step 1
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 2 Press Select to change the status.
Step 3 Press Exit.
Turn Mobile Connect On or Off for All Remote Destinations from a Desk Phone
Procedure
Step 1 Press Mobility or To Mobile to display the current remote destination status (Enabled or Disabled).
Step 2 Press Select to change the status.
Step 3
Press Exit.
Switch a Desk Phone Call to a Mobile Phone
Procedure
Step 1
Press Mobility.
Step 2 Select To mobile.
Step 3 Answer the in-progress call on your mobile phone.
Note
You cannot use the same phone line for any other calls, but if your desk phone supports multiple
lines, you can use another line to make or receive calls.
Cisco IP Phone 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
Enable Mobile Connect
59