Setting Functions; Displaying Information - Fujitsu P27T-7 Operating Manual

Operation

Setting functions

Input select
Language
DDC-CI
OSDTimeout
Factory recall

Displaying information

26
Call up the Setup settings window
Select the input signal
This function is used to select the input signal (VGA, DVI, DP or HDMI).
This is on condition that the display adapter supports this function.
Set the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
Set the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
data cable, an Auto Processing message is displayed. The language selection
menu appears.
Call the Information setting window
This function displays the model designation, serial number, resolution, H/V
frequency and ECO mode.
touch sensor. If you are using a VGA
Fujitsu