Fujitsu P27T-6 IPS Operating Manual

Fujitsu P27T-6 IPS Operating Manual

Hide thumbs Also See for P27T-6 IPS:

Advertisement

Display
Operating Manual
P27T-6 IPS

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu P27T-6 IPS

  • Page 1 Display Operating Manual P27T-6 IPS...
  • Page 2 For automatic driver updates, go to: "http://support.ts.fujitsu.com/support/index.html" Should you have any technical questions, please contact: • Our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your authorized distributor • Your sales office We hope you really enjoy using your new Fujitsu system.
  • Page 4 Brand names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-K1372-Z320-1-7619, edition 1...
  • Page 5: Table Of Contents

    P27T-6 IPS Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-307 Technical specification...
  • Page 6 All other trademarks used in this document are trademarks or registered trademarks of their respective owners and are recognised as being protected. Copyright © Fujitsu Technology Solutions GmbH 2010 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, either in part or in whole.
  • Page 7 HDMI port ................37 Fujitsu Technology Solutions...
  • Page 8 Contents Fujitsu Technology Solutions...
  • Page 9: Your Lcd Screen

    Nonetheless, it is important to always observe the safety notes given in the operating instructions for the computer and in this manual. In the event of any problems, please contact your sales office or our Service Desk. Fujitsu Technology Solutions...
  • Page 10: Further Information

    Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g: MENU This font indicates terms and texts that are emphasised or highlighted, e.g.: Do not switch off the device Fujitsu Technology Solutions...
  • Page 11: Important Notes

    Use a screen saver with moving images and activate the power management for • your monitor to prevent still images from "burning in". • If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°. Fujitsu Technology Solutions...
  • Page 12: Power Cable

    The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu Technology Solutions...
  • Page 13: Ce Marking

    2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". Power management The Fujitsu LCD monitor is equipped with power management which, when in 0W power saving mode, reduces the power consumption to 0W (for VGA and DVI). Disposal and recycling This device has been manufactured as far as possible from materials which can be recycled or disposed of in such a way that the environment is not damaged.
  • Page 14: Getting Started

    Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Setting up the device To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Fujitsu Technology Solutions...
  • Page 15: Setting Up An Ergonomic Video Workstation

    Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). Fujitsu Technology Solutions...
  • Page 16 Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in Chapter "Removing monitor base", Page Fujitsu Technology Solutions...
  • Page 17: Adjusting Height

    The inclination of the monitor can be adjusted by - 5° (forward) and +25° (back) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. Fujitsu Technology Solutions...
  • Page 18: Removing Monitor Base

    You can now mount a swivel arm or a wall bracket in accordance with VESA FPMPMI using a hole spacing of 100 mm. For instructions on how to mount the swivel arm or wall bracket, please see the documentation for the swivel arm or wall bracket. Fujitsu Technology Solutions...
  • Page 19: Connecting The Device

    8 = HDMI sockets 3 = Power connector 9 = AUDIO-IN socket 4 = 0 W switch 10 = USB IN (Downstream) 5 = DP connector 11 = USB OUT (Upstream) 6 = DVI-D socket (DVI) ► Remove the cover. Fujitsu Technology Solutions...
  • Page 20: Connecting Cables To The Computer

    ► Plug the power connector of the computer into a properly grounded mains outlet. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is active as standard. Fujitsu Technology Solutions...
  • Page 21: Operation

    HDMI and DP data cables, but may also become necessary for VGA or DVI on some PCs if the monitor remains dark in the 0 W operating mode. ► Switch the device on again with the ON/OFF switch (1). Fujitsu Technology Solutions...
  • Page 22: Notes On Power Management

    BASIC power-saving mode are the preset factory defaults. Once an input is made at the computer the screen contents are restored. For detailed information on how energy-saving mode operates, please refer to the operating manual or technical manual of the computer. Fujitsu Technology Solutions...
  • Page 23: Changing The Monitor Settings

    OSD. Performing auto-adjustment of the monitor ► Press the button for about 1 second. AUTO  The Auto Processing message appears Picture quality and position are set to optimum values for your system. Fujitsu Technology Solutions...
  • Page 24: Locking The Osd Menu

    If the ECO operating mode is activated, the following OSD settings are changed: Mode Office Colour 6,500 K Brightness reduced After the ECO operating mode is switched off, the brightness previously set by the user is restored. Fujitsu Technology Solutions...
  • Page 25 ► Press and hold the INPUT buttons at the same time for a few seconds.  The message Power button locked / unlocked is displayed. Proceed in the same way to release the locked ON/OFF switch again. Fujitsu Technology Solutions...
  • Page 26: Changing The Monitor Settings Using The Osd Menu

    (e.g. Image adjust). INPUT ► Press the button to select the highlighted icon. MENU  The Image adjust settings window is displayed. ► Press the AUTO button to exit the main menu. Fujitsu Technology Solutions...
  • Page 27: Osd Menu Functions

    All possible adjustments of the main menu are described in the following. OSD menu functions The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used. Fujitsu Technology Solutions...
  • Page 28: Adjusting The Brightness And Contrast

    Colour = 7500K, ACR = off) Office Office presets (the settings for colour and sharpness can be adjusted) Photo Photo presets (colour, sharpness, saturation, ACR) Video Video presets (colour, sharpness, saturation, ACR) ACR = Dynamic contrast (on / off) Fujitsu Technology Solutions...
  • Page 29: Adjusting The Picture Size And Position

    Keep aspect = maximum picture size without distortion (only for PC image) Adjusting the volume Call the Audio setting window Volume Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Fujitsu Technology Solutions...
  • Page 30: Setting Colour Temperature And Colours

    With this function all settings are reset to the factory settings without prompting for confirmation. The function is executed with the button. If you are using a VGA data cable, an Auto Processing message is displayed. The language selection menu appears. Fujitsu Technology Solutions...
  • Page 31: Displaying Information

    Operation Displaying information Call the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal, colour setting and polarity of the synchronisation signal are displayed. Fujitsu Technology Solutions...
  • Page 32: Notes On Ergonomic Colour Adjustment

    + Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu Technology Solutions...
  • Page 33: Troubleshooting

    Picture is shaking ► Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Press the AUTO button to perform auto-adjustment of the screen. Fujitsu Technology Solutions...
  • Page 34 Despite the correct resolution of 2560 x 1440, small fonts are not sharp or are illegible and black font is shown coloured. (The information menu of the monitor shows a resolution of 1280 x 1440). Fujitsu Technology Solutions...
  • Page 35: Explanatory Information About Standard Iso 9241-307

    The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher.
  • Page 36: Technical Specification

    Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. P27T-6 IPS Dimensions and weight Visible diagonals 68.5 cm Dot pitch 0.2331 mm Image size Width 596.7 mm Height 335.7 mm...
  • Page 37: Vesa-Ddc-Compatible Vga Interface

    1280 x 1024 65.0 kHz 60 Hz 1680 x 1050 74.0 kHz 60 Hz 1920 x 1200 (only VGA, DVI, 80.0 kHz 75 Hz 1280 x 1024 88.7 kHz 60 Hz 2560 x 1440 (only DVI, DP) Fujitsu Technology Solutions...
  • Page 38: Video/Tv Operating Modes Using Dp And Hdmi

    SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu Technology Solutions...
  • Page 39: Dvi-D Port

    TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield not connected not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– Fujitsu Technology Solutions...
  • Page 40: Displayport Socket

    Earth Lane 2 (negative) Lane 0 (negative) Earth Lane 0 (positive) Connected to earth Connected to earth Auxiliary channel (positive) Earth Auxiliary channel (negative) Hot Plug Detect Return for Power Power for connector (3.3 V 500 mA) Fujitsu Technology Solutions...
  • Page 41: Hdmi Port

    TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect Fujitsu Technology Solutions...

Table of Contents