Table of Contents
Advertisement
Advanced setting functions
MENU
Image
OSD
Advanced
Information
Function
Presence Sensor
Proximity
Fujitsu
Presence Sensor
Proximity
Call Indicator
Daisy Chain
Overdrive
DDC/CI
Factory Recall
► Press the
► Press the
button twice and then
► Press the
/
► Press the
/
► Press the
button to save the settings and return to the main menu.
Description
Activating/deactivating the presence sensor
This function shuts down the monitor gradually while you are absent.
After 10 seconds of absence, the brightness is reduced to a minimum.
After a further 30 seconds absence, the display lighting is switched off.
This option only appears if your model has a presence sensor.
Setting the distance to the monitor
With this function, you can indicate your actual distance to the monitor and
optimise detection by the presence sensor.
The vertical indicator dynamically displays the detected distance to the
monitor. This setting can be used to set the distance within which you want
the sensor to react. If the vertical line is outside the setting bar, this will be
judged as "absent" by the presence sensor.
This setting can only be applied if the Presence Sensor function is active.
ADVANCED
button to call up the main menu.
to switch to the Advanced submenu.
button to mark a function in the submenu.
or
/
button to make the desired setting.
Off
50
Off
Off
Off
On
Operation
25
Advertisement
Table of Contents
