Fujitsu P27T-7 Operating Manual page 33

Having this problem?
Picture is wrongly adjusted
Picture disturbances (vertical lines)
Picture disturbances (horizontal lines, picture
noise)
The screen becomes darker
For DVI connection:
Despite the correct resolution of 2560 x 1440,
small fonts are not sharp or are illegible and
black font is shown coloured. (The information
menu of the monitor shows a resolution of 1280
x 1440).
Fujitsu
Check the following points:
► Run the Factory Recall function in the OSD
menu.
The Auto Processing message appears.
► Touch the
AUTO
auto-adjustment of the screen.
► Touch the AUTO
auto-adjustment of the screen.
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
► Contact our Service Desk.
► Use the DVI ‑ Dual Link data cable which
was supplied with the monitor.
Troubleshooting
sensor to perform
sensor to perform
29