Download Print this page

Changing The Monitor Settings; Changing The Monitor Settings With The Touch Sensors Of The Control Panel - Fujitsu P27T-7 Operating Manual

Led monitor
Hide thumbs

Advertisement

Operation

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the touch
sensors of the control panel
The touch elements of the control panel have two functions. When the OSD
menu is active, the current meaning of the touch element is shown directly
over the touch elements on the edge of the screen. With the OSD menu not
activated, you can make the following settings directly:
1 = Touch sensors for the OSD menu
(On-Screen-display)
2 = ON/OFF switch
Select OSD language
If one of the touch sensors is being touched for the first time for the OSD menu,
the selection screen for the language is displayed:
► Touch the
ECO
► Touch the
MENU
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
► Touch the
AUTO
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
20
1
/
or the
INPUT
/
/
sensor to confirm your entries or the
/
sensor for about 1 second.
3 = Power supply indicator
sensor to select the required language.
AUTO
2
3
/
sensor to cancel the process.
Fujitsu

Hide quick links:

Advertisement

loading