Troubleshooting And Error Messages - Yamato PPC-200W Operation Manual

PPC-200(W)
VI Troubleshooting and Error Messages
The scale can check various functions automatically. When a problem is detected, the fol low ing mes-
sag es will be displayed. If you take the steps described below but the problem is not fi xed, the scale
needs to be serviced by a qualifi ed scale technician.
1) The batteries are running low.
When the batteries are running low, this indicator will come on.
Replace all of the bat ter ies with new ones.
2) The batteries are low.
When the bat ter ies are too low, this indicator will be displayed.
The batteries must be replaced to use the scale.
3) The weight out of range.
When the weighed value is 6 or more divisions heavi er than the
scale's ca pac i ty this message will be dis played.
When the weighed value is 6 or more divisions below zero, this
message will be displayed. It is usually dis played when the plat-
form is removed or has something wedged under it.
4) Initial error on startup.
When the initial weight is heavi er than the permissible ze ro ing
range and the
played. Remove what ev er is on the platform and press the
key again.
When the initial weight is lighter than the permissive ze ro ing
range and the
played. Install the platform or remove any objects under the
plat form, and press the
5) The weighing sen sor error.
When the weight detecting sec tion has a prob lem, this message
will be displayed. Turn off the power. Then turn the power on
again.
6) The electronic circuitry error.
When the electronic circuit has a problem, this message may be
dis played. Turn off the power. Then turn the power on again.
7) The elec tro mag net ic disturbance error.
This Indicator is oc ca sion al ly displayed due to strong static elec-
tric i ty and/or electro -magnetic disturbance. Turn off the power.
Then turn the power on again.
key is pressed, this message will be dis-
key is pressed, this message will be dis-
key again.
Operation Manual
9
YCO-1047-07-04