Advertisement
www.aeroplusrc.com
Gas Engine
From the template that came with the engine, use the cross axis on the engine box to mark the
mounting holes.
Check the diameter of the required bolts and drill accordingly.
Mount the engine with the stand offs to the bulkhead. Remember to use large washers on the
inside to spread the load and use plenty of thread lockers.
Exhaust options: Depending on the engine, many exhaust options are available. Standard muffler,
Pitts Exhaust of canister with header.
If using a canister, a bracket is already inside the model. Using silicon tubing will hold the end of
the canister.
The front outlet of the canister will pop out of the bottom of the cowl
Aero Plus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com
Advertisement
