Step 3: Charging Your Streamer - Unitron uTV 3 Manual

When connecting the uTV 3 to the headset
socket of your TV, you are able to adjust the
volume via your TV remote control.
Some TVs will switch off their loudspeakers
when plugging the jack into the headset socket
– the TV will not be audible for other people. In
this case, use the Cinch/RCA output socket as
described in Option 3. For further information
on volume adjustment, refer to the section on
adjusting the volume. The uTV 3 can also be
connected to any other audio source such as an
MP3 player, PC or home sound system using the
stereo plug cable.

Step 3: Charging your streamer

To charge the streamer, gently plug it into the
charging slot of the uTV 3 as shown below.
Ensure the integrated plug is inserted into the
streamer charging socket correctly.
Ensure that you are using the correct charging
slot.
12
Changing the charging slot for your streamer
The uTV 3 comes with two charging slots. You
may need to change the slot using a Phillips
head screwdriver.
1. Unplug the USB power cable.
2. Unscrew the screw on the bottom of the
uTV 3. Lift the charging slot to remove.
3. Insert the other slot into the opening.
Replace the screw at the bottom and gently
tighten it.
13