Important Information - Unitron uTV 3 Manual

Hide thumbs Also See for uTV 3:
Table of Contents

Advertisement

Most probable cause
Volume during streaming is not comfortable
(too low or too high)
TV audio sources have
different output volumes
After connecting the uTV 3, the TV loudspeaker is
switched off
The headset output
connection of the TV is
selected
28
Remedy
If uTV 3 is connected to the
optical, coaxial or RCA/
Cinch socket of your TV,
adjust the volume by using
the uTV 3 volume buttons
If the uTV 3 is connected
to the headset output of
the TV, you may adjust the
volume using the TV volume
control
Adjust volume of your
satellite receiver or set-top
box
Adjust the volume using the
streamer volume buttons
Choose another audio
output on your TV such as
optical, coaxial or RCA/
Cinch

Important information

Please carefully read the corresponding
section in the uDirect 3 or uStream user
guide which is delivered along with each
accessory.
Hazard warnings
Keep this device out of reach of pets and
children under three years.
Only use hearing aids that have been
specially programmed for you by your
hearing healthcare professional.
Changes or modifications to any of the
devices that were not explicitly approved by
Unitron are not permitted.
Opening the uTV 3 might damage it. If
problems occur which cannot be resolved
by following the remedy guidelines in
the troubleshooting section of this user
guide, consult your hearing healthcare
professional.
29

Advertisement

Table of Contents
loading

Table of Contents