Information And Explanation Of Symbols - Unitron uTV 3 Manual

device generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Notice 4:
FCC/IC RF Radiation Exposure Statement
This equipment complies with FCC/Industry Canada RF radiation
exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Australia: Supplier Code Number
New Zealand: Supplier Code Number Z1285
34
N15398

Information and explanation of symbols

The CE symbol is confirmation by Unitron that this
Unitron product meets the requirements of the R&TTE
xxxx
Directive 1999/5/EC on Radio and Telecommunication
Terminal Equipment. The numbers after the CE symbol
are the numbers of consulted certified bodies under
the above mentioned directives. The alert sign means
that potential restrictions on its use are applicable in
one or more EU Member States.
This device is a class 2 device and can be operated in
the EU member states without restrictions for indoor
use, but must not operated outdoors in France.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and product safety.
Australian EMC and Radiocommunications compliance
label.
This symbol shall be accompanied by the name and
the address of the authorised representative in the
European Community.
This symbol shall be accompanied by the name and
the address of the manufacturer (who are placing this
device on the market).
35