Step 2: Listening To The Tv - Unitron uTV 3 Manual

Step 2: Listening to the TV

You will hear the sound of the TV directly in your
hearing aids.
If you cannot hear the sound of your TV through
uTV 3, repeat the setup in steps 1-6.
If no audio is available, uTV 3 automatically
stops the Bluetoogh audio transmission to the
streamer after five minutes. Its main indicator
light will blink green.
The uTV 3 supports Bluetooth operation up to
a range of 30 m (100 ft). Line-of-sight between
your streamer and the uTV 3 is not required.
However, interference in the environment by
walls or furniture may reduce the operating
range.
If the streamer moves out of range of the
uTV 3, the wireless audio transmission will be
terminated. If the streamer is then moved back
into range of the uTV 3, it will automatically
resume streaming to your hearing aids.
18
It may take up to ten seconds until the
streaming resumes. Both streaming light
indicators, should be solid blue during
streaming.
If the uTV 3 status light:
• blinks green, make sure the audio input to
the uTV 3 is properly connected.
• is green, make sure the streamer is switched
on, both ends of the neckloop are plugged in
(for uDirect 3 or uDirect 2) and the devices are
paired.
• blinks blue, you are in pause mode. Press
the streamer access ( ) button to resume
streaming.
19