Setting Up The Power Supply; Charging The Udirect 3 - Unitron uDirect 3 User Manual

Setting up the power supply

1. Select the adapter that corresponds to your
country.
US EU
2. Insert the round corner of
the adapter to the round
corner of the universal
power supply until it is
completely inserted.
3. Click the tail of the adapter
in to lock it into place.
Make sure the adapter is securely locked.
To remove the power adapter:
1. Pull back the tab on the
universal power supply and
hold.
2. Gently pull the adapter
upwards to remove it from
receptacle.
3. Then start over with step one (above).
4
UK AUS
2.
1. 2.

Charging the uDirect 3

Your uDirect 3 has a non-removable
rechargeable battery.
To charge it:
1. Plug the mini-USB plug into the mini-USB
port on the uDirect 3.
3.
2. Plug the power supply into a power outlet.
During charging, the power indicator is solid
red, this typically takes 90 minutes.
When the battery is fully charged, the power
indicator is solid green.
It is safe to leave the uDirect 3 connected to the
charger overnight.
When charging your uDirect 3 for the first time,
let it charge for at least three hours, even if the
battery indicator is not lit or turns green earlier.
5