Daily Usage Of The Utv 3; Step 1: Wearing Your Streamer - Unitron uTV 3 Manual

Hide thumbs Also See for uTV 3:
Table of Contents

Advertisement

uTV 3 will remain in pairing mode for two
minutes or until the pairing has been
completed.
Completion of pairing
Wait until both indicator lights turn solid blue.
This can take up to two minutes but usually
occurs within a few seconds.
The uTV 3 basestation can be paired to a
maximum of four streaming devices. A fifth
pairing will replace the first paired device.
The two devices only need to be paired once.
They remain paired after switching off and will
automatically connect after being switched on
again.
16

Daily usage of the uTV 3

Step 1: Wearing your streamer

Wear the streamer as shown and switch it on.
For a more detailed description of the
streamers, refer to the streamer's user guide.
After switching your streamer on, it will
automatically recognize your Unitron wireless
hearing aids.
In cases of interference with other hearing aids,
contact your hearing healthcare professional.
The uTV 3 can only transmit the audio signal to
one streamer at a time. Streaming to multiple
receiving streamers is not possible.
17

Advertisement

Table of Contents
loading

Table of Contents