Receiving Incoming Calls; Ending A Call - Gigaset DE900 IP PRO User Manual

Initiating ringback
if the number you have called is busy. Prerequisite: This function is supported by your
phone system or your provider.
§§Ringback§§
Press the display key to initiate a ringback.
Ringback is initiated as soon as the line is free again.
Deactivating ringback
You can deactivate the ringback for all of the VoIP accounts configured on your phone or
just for certain VoIP accounts.
‰
¢
Select Services
q
Accounts for which ringback is permitted are marked with a tick.
Select the required entry.
§§Change§§
Press the display key to remove a tick and to deactivate the ringback.

Receiving incoming calls

You hear the ringer and the speaker key
Reject
Please note
When you receive a call, the phone first of all searches for a corresponding entry in the
local directory. If the number doesn't appear there, the other directories are searched
(if configured) (
Deactivating the ringer
§§Silence§§
Press the display key to deactivate the ringer. You can then decide whether
to accept or reject the call.
Rejecting a call
§§Reject§§
Press the display key or the end key

Ending a call

&
Put down the receiver or press the end key
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
¢
Active Ringbacks
Brown, Tim
l
1234567890
ã
§§1§§ Account1
08:00 Amsterdam
Silence
£
Page 147).
A
flashes.
The display shows the caller's number
(where calling line identification is per-
£
mitted Page
they are saved in the directory. If a pic-
ture is assigned to the caller, this will also
appear.
The account that the call is received on is
c also shown.
Lift the receiver. You can speak to
the caller.
I
to reject the call.
I
.
Making calls
36) and their name, if
33