Gigaset DE900 IP PRO User Manual page 15

Connecting the PC
You must connect your Gigaset DE900 IP PRO to a PC to use the Web user interface or to
configure the phone using the Web configurator.
Your phone has an integrated two-port switch. This allows you to connect your PC to the
local network via the phone and avoid using additional connection ports on the switch or
router.
You need an additional Ethernet cable to connect a PC.
§§1§§
Connect an Ethernet cable to the left-hand LAN port on the rear of the phone.
§§2§§
Connect the other end of the Ethernet cable to a LAN port on the PC.
Connecting a device to the mains power supply (if required)
Your Gigaset DE900 IP PRO is supplied with sufficient power by PoE (Power over Ethernet)
and does not need to be connected to the mains power supply. Prerequisite: The device
is connected to an Ethernet switch with PoE functionality (PoE class IEEE802.3af )
£
( Page 14).
However, in the following cases you must connect the device to the mains power supply:
u
If you connect the device to the local network using WLAN
u
If you connect additional extension modules to the device (
The power adapter is supplied with three different plug-in modules for Europe, Great Brit-
ain and the USA. First attach the appropriate plug-in module to the power supply unit.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
1
First steps
2
£
Page 17).
15