Specifications - Roland VersaCamm VP-540 User Manual

6-5 Specifications

Printing technology
Media Width
Thickness
Roll outer diameter
Roll weight
Core diameter
Printing/cutting width (*1)
Ink cartridges Types
Colors
Printing resolution (dots per inch)
Cutting speed
Blade force
Cutting blade Type
Blade offset
Software resolution (when cutting)
Distance accuracy (when printing) (*2)
(*3)
Distance accuracy (when cutting) (*3)
Repeatability (when cutting) (*3) (*4)
Alignment accuracy for printing and cut-
ting (*3) (*5)
Alignment accuracy for printing and cut-
ting when reloading media (*3) (*6)
Media heating system (*7)
Connectivity
Power-saving function
Power requirements
Power During operation
Sleep mode
Acoustic noise level During operation
During standby
Dimensions (with stand) (*8)
Weight (with stand)
Environmental Power on (*9)
Power off
Accessories
VP-540
210 to 1,371 mm (8.3 to 54 in.)
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for
Maximum 180 mm (7 in.)
Maximum 30 kg (66 lb.)
50.8 mm (2 in.) or 76.2 mm (3 in.)
Maximum 1,346 mm (53 in.)
220-cc cartridge / 440-cc cartridge
Four colors (cyan, magenta, yellow, and black)
Roland CAMM-1 series compatible
0 to 1.5 mm (0 to 0.059 in)
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CUTTING
MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance
traveled, or ±0.1 mm, whichever is greater
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Print heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F)
Dryer, setting range for the preset temperature: 30 to 50°C (86 to 122°F)
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep feature
AC 100 to 120 V ±10%, 8.3 A, 50/60 Hz or
AC 220 to 240 V ±10%, 4.3 A, 50/60 Hz
Approx. 1,110 W
Approx. 34 W
64 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
2,310 (W) x 740 (D) x 1,125 (H) mm
(90.9 (W) x 29.1 (D) x 44.3 (H) in.)
112 kg (247 lb.)
Temperature: 15 to 32ºC (59 to 90ºF) (20ºC [68ºF] or more recommended),
humidity: 35 to 80%RH (non-condensing)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80%RH (non-condensing)
Exclusive stands, power cord, blade, blade holder, media clamps, media flanges,
replacement blade for separating knife, cleaning kit, software RIP, User's Manual,
etc.
VP-300
Piezoelectric inkjet
182 to 762 mm (7.2 to 30 in.)
cutting
Maximum 20 kg (44 lb.)
Maximum 736 mm (29 in.)
Maximum 1,440 dpi
10 to 300 mm/s
30 to 300 gf
0.025 mm/step
±0.1 mm or less
±0.5 mm or less
AC 100 to 120 V ±10%, 5.8 A, 50/60 Hz or
AC 220 to 240 V ±10%, 3.0 A, 50/60 Hz
Approx. 780 W
Approx. 33W
64 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
1,700 (W) x 740 (D) x 1,125 (H) mm
(66.9 (W) x 29.1 (D) x 44.3 (H) in.)
89 kg (196 lb.)
Chapter 6 Specifications 133