Table of Contents
Advertisement
4-8 Making Various Adjustments for Cutting
Description
You perform this when printing followed immediately by cutting yields positioning for printing and cutting that is
slightly misaligned. You print alignment marks, perform detection of the printed marks, and correct the discrepancy.
Subtle misalignment between the printing and cutting positions may occur due to the thickness of the media or the
head height. We recommend making correction to match the media you're using.
Default Setting
[F] (feed direction): 0.00 mm
[S] (scanning direction): 0.00 mm
94
Chapter 4 Feature Reference
Advertisement
Table of Contents
