Table of Contents
Advertisement
4-9 Performing Printing and Cutting Separately
2.
Set the align points.
BASE POINT
ALIGN POINT 1
W1100 mm
B1
This indicates that the base point
and align point 1 have been set.
Repeat steps
Send the cutting data and perform cutting.
About Align Points
The numbers for align points are determined with reference to the location of the base point. You cannot set an align
point unless you specify a base point. Redoing the setting for the base point clears any align points that have been set.
98
Chapter 4 Feature Reference
through
to specify other align points as required.
Use
center of the blade with the location shown in
the figure.
Press
.
Press
.
The number of the align point you set is automatically
determined.
Press
.
Press
to go back to the original screen.
to align the
Advertisement
Table of Contents
