Service Mode Operation - Schwinn MPower Echelon2 Console Installation Manual

SERVICE MODE OPERATION

Service mode may be entered immediately after powering on the console, or when the
console is in Pause mode (Pause mode is indicated by flashing digits on the screen).
Service mode cannot be entered during Ride mode. Follow the instructions in the
attached picture to enter Service mode and navigate through the menus. In Service
mode, the STAGE button is used to scroll backwards. The LIGHT button is used as an
enter button to enter submenus, or make select desired setting. The AVG/MAX button
is used to scroll forward.
23 | P a g e M P o w e r E c h e l o n 2 I n s t a l l a t i o n G u i d e