In this chapter, we describe the steps you should follow to configure the CN2610 as a Terminal
Server. The CN2610 provides Telnet and Rlogin protocols for terminals to establish connections
with UNIX hosts. Two terminal modes are supported—ASCII terminal with up to 8 simultaneous
sessions, and Binary terminal with one session for one user. Terminals can be connected directly
to one of the CN2610's RS-232 ports, or connected from a remote site by using external modems.
The following topics are covered in this chapter:
Accessing the Console Utility
Selecting the Application
Configuring TERM_ASC Mode
Configuring TERM_BIN Mode
Configuring the Serial Ports
Save
Restart
Setting Up Terminal
Chapter 10
1
0
1
0