Configuring The Static Routing Table - Moxa Technologies CN2610 User Manual

CN2610 User's Manual
3. Use the Up/Down arrow keys to move the cursor to the Routing protocol pop-up selector.
Press Enter to see the options. Select RIP-1 or RIP-2. The RIP setting is only for sending
packets. For receiving packets, the CN2610 supports both RIP-1 and RIP-2.
CN2610-8
------------------------------------------------------------------------------
Info.
Examine/modify async server advance configuration
ESC: back to menu
RADIUS server IP
SNMP community name
SNMP trap server IP address
Ethernet IP forwarding
Routing protocol
TCP retransmission timeout
SIO data transfer timeout
4. Press Esc to return to the MAIN MENU.

Configuring the Static Routing Table

Although RIP-1 and RIP-2 periodically update routing tables between different routers, you still
need to add routing entries in the routing table for routes only directed to you.
Open Server Menu
1. From the MAIN MENU, select Server, and then press Enter.
CN2610-8
------------------------------------------------------------------------------
[Server]
Examine/modify async server node/table configuration
Enter: select
2. From the SERVER MENU, select Route_table and then press Enter.
CN2610-8
------------------------------------------------------------------------------
Info.
Examine/modify the routing table
Enter: select
Lan [Adv.] Host_table Route_table User_table Quit
Enter: select
RADIUS key
UDP port <1:1645 2:1812>
Enable RADIUS accounting
Route_table to configure the static routing table.
Port seTting sAve Utility Restart Exit
ESC: previous menu
Lan Adv. Host_table
ESC: previous menu
CN2610-8_19 V2.0
[
[
[1]
[no ]
[public
[
+-------+
[no ] | None
[None ] | RIP-1 |
| RIP-2 |
[ ]+-------+: 50 – 60000 ms)
[ ] (range: 0 – 1000 ms)
CN2610-8_19 V2.0
CN2610-8_19 V2.0
[Route_table] User_table Quit
15-4
Setting Up Routing
]
|
MAIN MENU
SERVER MENU
]
]
]