Configuring The Static Routing Table - Moxa Technologies CN2510-8 User Manual

CN2510

Configuring the Static Routing Table

Although RIP-1 and RIP-2 periodically update routing tables between different routers, you still need to add
routing entries in the routing table for routes only directed to you.
Open Server Menu  Route_table to configure the static routing table.
1. From the MAIN MENU, select Server, and then press Enter.
CN2510-8
------------------------------------------------------------------------------
[Server]
Examine/modify async server node/table configuration
Enter: select
2. From the SERVER MENU, select Route_table and then press Enter.
CN2510-8
------------------------------------------------------------------------------
Info.
Examine/modify async server advance configuration
Enter: select
3. Use the tab and arrow keys to move the cursor to configure Gateway, Destination, Netmask, and Metric.
Each item is described in detail below the figure.
CN2510-8
------------------------------------------------------------------------------
Info. Lan Adv. Host_table
Examine/modify the routing table
ESC: back to menu
Entry
01
02
03
04
Setting
Entry
Gateway
Destination
Netmask
Metric
4. Press Esc to return to the MAIN MENU.
Port seTting sAve Utility Restart Exit
ESC: previous menu
Lan Adv. Host_table
ESC: previous menu
Enter: select
Gateway
[ ] [
[ ] [
[ ] [
[ ] [
Value
01-32
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
1-15
CN2510-8_5631 V2.0
CN2510-8_5631 V2.0
User_table Quit
[Route_table]
CN2510-8_5631 V2.0
[Route_table] User_table Quit
Destination Netmask
] [
] [
] [
] [
Notes
A maximum of 32 entries are allowed.
The IP address of the next-hop router.
The host IP address or network address of the
route's destination.
The destination network's netmask.
The number of hops from the source destination. Required
13-4
Setting Up Routing
MAIN MENU
SERVER MENU
Metric
] [01]
] [01]
] [01]
] [01]
Necessity
Fixed
Required
Required
Required