Western Digital ShareSpace User Manual page 98

11. Replace the system cover.
(a) Carefully place the system cover on the unit so that the tabs on the cover align with the slots
on the unit.
(b) Slide the cover toward the front of the unit until it is fully closed.
(c) Tighten the captive screws on the rear of the unit.
12. Reconnect the cables and power on the unit.
13. Set up the new drive for RAID configuration.
For related instructions, refer to "Manage RAID" on page 57.
WD SHARESPACE
USER MANUAL
REPLACING A DRIVE - 93