Western Digital ShareSpace User Manual page 67

Warning! Formatting hard drives erases all the disk contents, including
partition tables, logical volumes, and all shared folders and subfolders
and files. Perform this procedure only when it is safe to proceed. When
formatting a USB hard drive, only one partition is created and the
partition is formatted as FAT32.
4. Click OK.
5. Disconnect the USB hard drive from the network storage system.
To safely remove a USB hard drive:
Note: Whenever a USB device is disconnected without first being ejected or dismounted, there is a
risk of data loss or damage to the USB hard drive. With the safe remove disk option you can safely
remove any USB hard drive attached to the device.
1. On the USB Disk tab, select a USB hard drive.
2. Click the Safely Remove Disk icon
3. Click OK.
USB to WD ShareSpace Backup
Use the USB to ShareSpace Backup tab to set a destination share or source share
for a different USB storage backup method.
To set a destination share name for the USB hard drive to WD ShareSpace backup:
1. On the USB Shares page, select the USB to WD ShareSpace Backup tab.
2. Select a share to be used as a destination share from the Destination Share
list.
3. Click Submit.
.
NETWORK STORAGE MANAGER - 62
WD SHARESPACE
USER MANUAL