Western Digital ShareSpace User Manual page 56

To create a new workgroup for the system:
1. On the Workgroup/Domain Setup page, click Workgroup.
2. Enter a name for the workgroup in the Workgroup Name field.
3. Click Submit.
To set up a workgroup name:
1. Click Workgroup.
2. Enter a name for your workgroup in the Workgroup Name field.
3. Click Submit.
To set up a domain name:
1. Click Domain Member.
2. Enter the domain name in the Domain Name field.
3. Enter the domain controller IP address in Domain Controller IP Address field.
4. Enter the Administrator name in the Administrator field.
5. Enter the Administrator password in the Administrator Password field.
Note: The local user and domain user share the same access control rights if the user name of the
local and domain users are the same (FTP service excluded).
6. Click Submit.
Remote Access
See "Remote Access Setup" on page 80.
WD SHARESPACE
USER MANUAL
NETWORK STORAGE MANAGER - 51