Oki MC860 Maintenance Manual page 113

Oki Data CONFIDENTIAL
Fax Setup
The shaded portion shows the default setup value when shipped from the factory.
Item
Default Doc. Type
Settings
Density
Scan Size
Cont. Scan
TTI
MCF Report
Memory Tx
43967002TH Rev.1
Contents
Normal Set default setup of selecting image
Fine quality when scanning document.
Ext-Fine
Photo
Background
Lightest Set default setup of density when
Lighter scanning document.
Normal
Darker
Darkest
Auto Set default setup of the document
Letter scanning area.
Letter
Tabloid
Legal 14
H. LTR
A3
B4
A4
A4
B5
A5
OFF Select default setup to inquire or not
ON to inquire if next page of document is
ready.
OFF Set whether or not to print sender's
ON name on document when it is printed at
destination.
OFF Set whether or not to print result of
ON transmission automatically.
OFF Set default setup of memory
ON transmission.
When it is set to OFF, real-time
transmission takes place.
The shaded portion shows the default setup value when shipped from the factory.
Item
F-code Box Register/ Secure Box Name of box
Edit
Bulletin Box Name of box
Contents
Enter name of confidential document
box.
Sub-Address Enter name of confidential document
box.
More than 1 character and maximum 20
characters, 0 to 9 (Numeral only)
Password Enter name of confidential document
box.
More than 1 character and maximum 20
characters, '0'-'9', '#', '*' (Numeral only)
Retention 00 to -31 days
period
Security Enter password of confidential document
identification box.
number 4 characters fixed, 0 to 9 (Numeral only)
Enter name of bulletin board box.
Maximum 16 half-sized characters,
maximum 8 full size characters (Number
of characters is same to confidential.)
Sub-Address Enter sub address of bulletin board box.
More than 1 character and maximum 20
characters, 0 to 9 (Numeral only)
Password Enter password of bulletin board box.
More than 1 character and maximum 20
characters, '0'-'9', '#', '*' (Numeral only)
Rx Protect OFF When set to ON, F code
/ ON bulletin board reception is
prohibited. Bulletin board polling
transmission only is permitted.
Auto Print OFF When set to ON, received image
/ ON data is printed automatically
when F code bulletin board
reception is completed.
3. Installation
113 /