Installing The Driftwood Log Set - Montigo P52DF Installation & Maintenance Manual

Installing the Driftwood Log Set

The P52DF* has the option of installing a drift wood log set.
Once the firestones or speckled stones have been installed
the log set can be installed.
Ensure logs are securely placed and will not tip or fall.
Remove media where logs touch the burner tray to ensure
a more secure position.
Lean the logs against the back panels. NO LOGS SHOULD
LAY ACROSS OR OVER TOP OF THE BURNER PORTS
ON THE SURFACE OF THE BURNER.
Step 1. Remove the glass door as described in the
previous section.
Step 2. Ensure selected media is installed per
instruction as per Figures 23 - 23f or 24 - 24a.
Step 3. Unpack the logs and handle with care.
3
1 2
Figure 25.
2 3
1
Figure 25a.
Step 4. Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports.
Place Log 2 of LGS58 on top of log 3.See Figure 25b.
XG0196 - 150204.3
Installation
LGS58
5
4
LGS59
4 5 6
2
Ports
Figure 25b.
Step 5. Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see figure 25c
Ports
Figure 25c.
Pilot
6
Ports
Figure 25d.
Step 6. Place log 6 of LGS59 across of log 1 of LGS58,
see figure 25e.
Ports
Figure 25e.
P52DF* Indoor Gas Fireplace
1
5
6
3
Page 25