Oxygen System; Inflatable Restraint System; Flap Limitations; Paint - Cirrus DESIGN SR20 Information Manual

Cirrus Design
SR20
dated May 1998 or later revision, must be available to the pilot
during all flight operations
7. Serials with Avidyne MFD installed: The Avidyne FlightMax
EX5000C Pilot's Guide, P/N 600-00108-000, Revision 03 or later,
must be available to the pilot during all flight operations.

Oxygen System

Whenever the operating rules require the use of supplemental oxygen,
the pilot must:
• Use an oxygen system approved by Cirrus Design and listed in
the Oxygen System AFM Supplement Part Number 11934-
S09.
• Secure the oxygen bottle in the right front seat as described in
the AFM Supplement noted above.

Inflatable Restraint System

Serials 1005 thru 1267 after SB 2X-25-14; Use of a child safety seat
with the inflatable restraint system is prohibited.

Flap Limitations

Serials 1005 through 1204 before accomplishment of Service Bulletin
SB 20-27-05: Simultaneous Flap operation and COM transmission is
prohibited.
Approved Takeoff Settings........................................... UP (0%) or 50%
Approved Landing Settings ............................. Up (0%), 50%, or 100%

Paint

To ensure that the temperature of the composite structure does not
exceed 150° F (66° C), the outer surface of the airplane must be
painted in accordance with the paint colors and schemes as specified
in the Airplane Maintenance Manual. Refer to Airplane Maintenance
Manual (AMM), Chapter 51, for specific paint requirements.
P/N 13999-002 Info Manual
September 2011
Section 2
Limitations
2-17