Conversion With Double Door - Ferroli SFL Instructions For Use, Installation And Maintenance

• Position the boiler cover and run the cable through the hole as indicated in fig. 13.
• Connect the cable to terminals 13 and 14 of the terminal block inside the burner.

3.7 Conversion with double door

Remove the grille "B" which will be used whenever the boiler works with wood or coke.
14
EN
3.15 A
L
N
4
5
6
7
8
9
10
11
12
13
14
fig. 13
B
fig. 14
cod. 3540Z905 - Rev. 00 - 04/2014
Remove the screw "C" and fix plate "D" with the screws "E" supplied in the kit.
Remove the jumper on terminals 13 and 14 of the terminal block inside the burner and
connect the door switch cable to them. Connect the other end of the cable to the com-
mon contacts and 2 located on the switch.
Fix the stays "F" respecting the distances indicated in fig. 16.
21
13
L
Hook the door "G", inserting the pins "H". Close the door, tightening the knob "P", in-
terposing the washer "R".
H
E
D
E
C
fig. 15
L
F
F
fig. 16
H
R
P
G
fig. 17
SFL