Installation Safety Thermostat Kit - Ferroli SFL Instructions For Use, Installation And Maintenance

SFL
E
Y
W
fig. 8
fig. 9
cod. 3540Z905 - Rev. 00 - 04/2014
OK
X
Fume damper
With boiler burning pellets, the fume damper "m" must be open.
3.6 Installation Safety thermostat kit (optional) only with 14-pole terminal block
A "safety thermostat" kit is available on request as an alternative to the "Safety coil"
to be used with the boiler working with pellets.
For installation, carry out the following instructions.
• Remove the boiler cover.
• Fix the bracket and the thermostat as indicated in the fig. 12.
• Insert the temperature probe in the special hole.
• Connect the fastons to the thermostat.
fig. 10
fig. 11 - Fume damper
fig. 12
EN
13