Setting up
9
Adjusting the multi-stitch or the zigzag stitch
.09
9
Changing from zigzag stitch to multi-stitch
.09.01
9
Changing from multi-stitch to zigzag stitch
.09.02
9 - 8
Fig. 9 - 12
Fig. 9 - 13
(on machines with an external motor)
Before sewing begins, make
sure that adjustment wheel 1 is
locked in position! Only switch
over when the machine is at a
standstill! Danger of machine
1
damage!
● By turning the balance wheel bring the
needle to its lowest position at its right
point of penetration (the marking on the
balance wheel and the arrow must match).
● Pull adjustment wheel 1 and turn it in the
direction of the arrow.
● If adjustment wheel 1 does not lock into
position, turn the balance wheel around
twice (the marking on the balance wheel
and the arrow must match).
● If necessary repeat the operation until the
adjustment wheel locks into position.
Before sewing begins, make
sure that adjustment wheel 1 is
locked in position! Only switch
over when the machine is at a
standstill! Danger of machine
damage!
1
● By turning the balance wheel bring the
needle to its lowest position at its right
point of penetration (the marking on the
balance wheel and the arrow must
match).
● Pull adjustment wheel 1 and turn it in the
direction of the arrow.