9
Entering the start and end backtacks
.10
● Switch on the machine.
● If necessary switch off the "darning seam" or "counted seam" function, see Chapter 10.01
Darning program or Chapter 10.02 Counted seam .
● By pressing the corresponding +/- key ("A") select the desired value for the number of
forward stitches (A) of the start backtack.
● By pressing the corresponding +/- key ("B") select the desired value for the number of
reverse stitches (B) of the start backtack.
● By pressing the corresponding +/- key ("C") select the desired value for the number of
reverse stitches (C) of the end backtack.
● By pressing the corresponding +/- key ("D") select the desired value for the number of
forward stitches (D) of the end backtack.
● By pressing the keys start backtack and/or end backtack , activate the corresponding
function (arrow appears next to the corresponding function key).
3
3
3 3
A
B
C
D
Setting up
9 - 9