Adjusting The Multi-Stitch Or The Zigzag Stitch; (On The 918 U And 938 U With An External Motor); Changing From Zigzag Stitch To Multi-Stitch; Changing From Multi-Stitch To Zigzag Stitch - Pfaff 918 Instruction Manual

9

Adjusting the multi-stitch or the zigzag stitch

.09

(on the 918 U and 938 U with an external motor)

9

Changing from zigzag stitch to multi-stitch

.09.01
Fig. 9 - 12
9

Changing from multi-stitch to zigzag stitch

.09.02
Fig. 9 - 13
Before sewing begins, make
sure that adjustment wheel 1 is
locked in position! Only switch
over when the machine is at a
standstill! Danger of machine
damage!
1
● By turning the balance wheel bring the
needle to its lowest position at its right
point of penetration (the marking on
the balance wheel and the arrow must
match).
● Pull adjustment wheel 1 and turn it in the
direction of the arrow.
● If adjustment wheel 1 does not lock into
position, turn the balance wheel around
twice (the marking on the balance wheel
and the arrow must match).
● If necessary repeat the operation until
the adjustment wheel locks into position.
Before sewing begins, make
sure that adjustment wheel 1 is
locked in position! Only switch
over when the machine is at a
standstill! Danger of machine
damage!
1
● By turning the balance wheel bring the
needle to its lowest position at its right
point of penetration (the marking on
the balance wheel and the arrow must
match).
● Pull adjustment wheel 1 and turn it in the
direction of the arrow.
● If adjustment wheel 1 does not lock into
position, turn the balance wheel around
twice (the marking on the balance wheel
and the arrow must match).
● If necessary repeat the operation until
the adjustment wheel locks into position.
Preparation
33