Installation and commissioning
8
Mounting the upper V-belt guard / Fitting the machine cover
.01.02
8
Fitting the reel stand
.01.03
8 - 2
2
9
7
Fig. 8 - 02
Fig. 8 - 03
● Slide the left and right halves of the V-
● Screw screw 3 with distance bush 4 into
● Align the V-belt guard, taking care that
1
8
● Tighten screws 1 and 2 (through holes 8
● When using an external motor, the motor
6
5
4
3
● Fit the reel stand as shown in Fig. 8-03 .
● Afterwards insert the stand in the hole in
belt guard into place with the slots
behind the heads of screws 1 and 2 .
threaded hole 5 .
clip 6 is behind slot 7 and in front of
distance bush 4 .
and 9 ) and screw 3 .
cover must also be fitted as described by
the motor manufacturer.
the table top and secure it with the nuts
provided.