Winding The Bobbin Thread; Adjusting The Primary Thread Tension - Pfaff 918 U Instruction Manual

Setting up
9

Winding the bobbin thread; adjusting the primary thread tension

.02
● Place an empty bobbin 1 onto bobbin winder spindle 2 .
● Thread the bobbin as shown in Fig. 9 - 02 and wind it clockwise around bobbin 1 a few
● Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2
● The thread tension on bobbin 1 can be adjusted using knurled screw 4 .
● The bobbin winder stops automatically when bobbin 1 is full.
If the thread is wound unevenly:
● Loosen nut 5 .
● Turn thread guide 6 accordingly.
● Tighten nut 5 .
9 - 2
5
Fig. 9 - 02
times.
and lever 3 .
The bobbin is filled up during sewing.
4
6
3
2
-
+
1