Zigzag Stitch Width - Pfaff 918 U Instruction Manual

12

Zigzag stitch width

.05.07
Requirement
At the largest zigzag stitch setting, marking 1 must be at the largest zigzag value on
scale 2 .
Fig. 12 - 08
● Turn the zigzag stitch adjustment lever 3 in accordance with the requirement .
● Move screw 4 upwards until it touches and then tighten it.
2
1
4
If the machine is equipped with a needle plate with a smaller hole than is
marked on the scale, the zigzag limit must be set according to the needle hole
width on the needle plate.
3
Adjustment
12 - 9