Setting The Zigzag Stitch And The Stitch Position; Entering The Stitch Length - Pfaff 2438 plusline Instruction Manual

Setting up
9

Setting the zigzag stitch and the stitch position

.06
9

Entering the stitch length

.07
9 - 5
M
L
3
2
Fig. 9 - 07
Switch on the machine.
After the machine has been switched on, the current stitch length is displayed.
Adjust the stitch length by pressing the corresponding +/- key.
4
R
1
2.0
Set the zigzag stitch width by turning the
zigzag lever 1.
To vary the adjustment press catch 2
against zigzag lever 1.
The setting can be read from scale 3.
Set the stitch position by turning stitch
position lever 4.
L = stitch position on left
M = stitch position in the middle
R = stitch position on the right