Status Monitor; Configing By Telnet - Acer 101/201 User Manual

Sharing router
Table of Contents


4.1.6 Status Monitor

This page provides working information of the working status of the AcerRouter
101/201. You can click on the DHCP Clients Table button to check on the DHCP IP
The DHCP Active IP Table lists all clients that get IP from the AcerRouter 101/201. To
see the latest IP distribution information, click the Refresh button on the upper left
corner to update the information.
4.2 Configuring by Telnet
1. At MS-DOS Prompt, execute " telnet" command to enter AcerRouter
101/201 Telnet Configuration Program. ¡ ] U se respective Telnet program in
other operating systems.¡ ^


Table of Contents

This manual is also suitable for:

Acerrouter 101Acerrouter 201

Table of Contents