Modem2 Setting; Dial In Setting - Acer 101/201 User Manual

Sharing router
Table of Contents


4.1.3 Modem2 Setting

Settings of Modem2 are similar to Modem1. Please refer to Modem1 Settings for
setting Modem2.

4.1.4 Dial In Setting

Dial-in User Account
To configure computers for remote dial-in access, please select " Enable" radio button
to initiate Modem2 Dial-in Service. Enter the ID and Password of dial-in users. The
default ID and Password setting for User1 is " guest" and " password" and up to three
users are allowed to use dial-in access.


Table of Contents

This manual is also suitable for:

Acerrouter 101Acerrouter 201

Table of Contents