Test; Setting Up Other Client Stations - Acer 101/201 User Manual

3.4 Test

After finishing the AcerRouter 101/201 setup, run another browser and key in any
external web site address like www.yahoo.com to see if the modem dials properly.
Once the Link LED is on, the Internet connection is successfully established.
Otherwise, refer the Troubleshooting section for further instructions.

3.5 Setting Up Other Client Stations

Follow the 3.2 Client-Side Network Settings to set up other client stations. If you use
fixed IP configuration, be careful not to assign the same IP to different computers.