Sound Active Mode; Auto Run Mode; Static Color Mode - ADJ FLAT PAR TW12 User Instructions

Flat Par TW12
1. This function will allow you to control each individual fixture's traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
"d.XXX" is displayed. "XXX" represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel
mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
• To run the 2 Channel Mode, press the MODE button until "Ch02"
is displayed. This is the 2 Channel DMX Mode.
• To run the 3 Channel Mode, press the MODE button until "Ch03"
is displayed. This is the 3 Channel DMX Mode.
• To run the 4 Channel Mode, press the MODE button until "Ch04"
is displayed. This is the 4 Channel DMX Mode.
• To run the 5 Channel Mode, press the MODE button until "Ch05"
is displayed. This is the 5 Channel DMX Mode.
• To run the 8 Channel Mode, press the MODE button until "Ch08"
is displayed. This is the 8 Channel DMX Mode.
• To run the 9 Channel Mode, press the MODE button until "Ch09"
is displayed. This is the 9 Channel DMX Mode.
4. See pages 14-19 for the DMX values and traits of each channel
mode.
5. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX controller.
WW/CW/A Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "H.XXX" is displayed you are in Warm White dimming mode.
Press the UP and DOWN buttons to adjust intensity.
3. When "C.XXX" is displayed you are in Cool White dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When "A.XXX" is displayed you are in Amber dimming mode. Press
the UP and DOWN buttons to adjust intensity.
5. After you have adjusted the colors to make your desired color you
can then activate strobing by pressing the SET UP button to
enter the strobe mode.
6. "S.XXX" will be displayed, this is strobing mode. The strobing can be
adjusted between "S.000" (strobe off) to "S.015" (fastest strobe).
ADJ Products, LLC - www.adj.com - Flat Par TW12 User Manual Page 8
Operating Instructions Flat Par TW12

Sound Active Mode:

In this mode the Flat Par TW12 will react to sound, and chase through
the different colors.
1. Plug the fixture in and press the MODE button until "So-X" is dis-
played. "X" represents the sound active mode (1-8) currently dis-
played.
2. The fixture will now change via sound.
3. To adjust the sound sensivity, press the SET UP button. "SJ-X"
will be displayed. Use the UP or DOWN buttons to adjust the
sensitivity. "SJ-1" is the least sensitive, "SJ-8" is the most sensitive.

Auto Run Mode:

There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together. The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AF-X",
"AJ-X", or "A-JF" is displayed.
• AF-X = Color Fade mode, there are 8 Color Fade modes to choose
from. Use the UP or DOWN buttons to scroll through the different
Auto Fade modes.
• AJ-X = Color Change mode, there are 8 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET UP
button until "SP.XX" is displayed. When this is displayed you can
adjust the running speed of your desired program. Use the UP or
DOWN button to adjust the speed between "SP.01" (slowest) and
"SP.16" (fastest). Once you have set your desired running speed,
press the SET UP button to return to your desired Auto Run Mode.

Static Color Mode:

1. Plug the fixture in and press the MODE button until "CLXX" is dis-
played.
2. There are 32 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP but-
ton to enter the strobe mode.
3. "S.XXX" will be displayed, this is strobing. The strobing can be
adjusted between "S.000" (strobe off) to "S.015" (fastest strobe).
ADJ Products, LLC - www.adj.com - Flat Par TW12 User Manual Page 9
Operating Instructions